Pure Hemp Oil
Pure hemp seed oil (cold pressed from cannabis sativa spp.)
100% natural
Food safe
Zero VOC
No additives
No petro-chemicals
Used For
Timber finishes, chalk paint seal, skin care products
Surface Preparation
Before you begin, make sure your surface is clean and dust free. If you’re applying hemp oil over a piece painted with chalk paint, ensure you give the paint about 12 hours to dry before you apply the oil.
How to Apply to Raw Timber
Hemp oil is a deep green colour but as a natural oil, will vary somewhat between batches. When first applied, it will deepen the colour of your finish (as if it were wet) but it will slowly lighten over time as the oil soaks in and cures.
Use a lint-free rag, or a paintbrush to apply hemp oil; sponges are also effective. Use sparingly - wipe one thin coat over the surface and let it soak into the finish for 12 hours.
Apply up to three coats for areas of higher wear (for example, timber chair seats, handrails, table tops etc.) Can be buffed to impart a gentle lustre.
Dry Time
12 hours but allow up to 30 days for full curing. Gentle use is fine up until that point.
Maintenance
For general maintenance and wear, simply re-apply as the surface becomes faded or dry. Normally only required every 2 years.
Clean Up
Warm, soapy water or a solvent such as Gilly’s Citrus Thin.
Safety
Hang out rags to dry, or soak in water. Don’t leave scrunched up.
Ingredients
Hemp seed oil 100%
