top of page
Eparency Top Coat/Glass Finish/Art Resin

Eparency Top Coat/Glass Finish/Art Resin

PriceFrom $42.00
Top Coat resin: Can be used for anything less than 4mm pour depth - coating, wall art, tile coasters, jewellery, polymer clay coating, timber surface, top coat, alcohol ink paintings, colour mixing (high viscosity keeps the colours from washing out), doming, excellent for beach scenes, wave, cells and other effects with its high viscosity nature.
 
100% Australian owned and Australian manufactured

  • Directions

    Mix resin and hardener EXACTLY in 1:1 ratio. Use a plastic or silicone container for mixing. Scrape sides and bottom of container to fully integrate products. Please use a mixing container that is clean and free of contamination. Tiny contamination would deteriorate the quality of final result. Do not use metal, especially aluminium containers to mix. Mixtures will turn milky colour in aluminium containers. DO NOT coat over 4mm. Multiple coats need to be applied to achieve thick coats over 4mm. Prewarming might be required to remove bubbles from thick coating. Once the product is coated onto the surface, do not stir or touch to avoid defects. You can use a lighter or flame torch to eliminate the surface bubbles. Curing takes 24-48hrs.

  • Specifications

    • Mixing quantity (the more you mix, the fast it cures and vice versa)

    • Room Temperature (higher room temperature will speed up the curing)

    • Mixing ratio: 1:1 (1 Parts A and 1 Part B)

    • Application temperature: Wide temperature range through summer to winter

    • Pot life(working time): 1-2 hours (Data based on 100ml mixing; 20 degree C room temperature). Please pour this product into mould as soon as possible, to avoid bubbling.

    • Time to reach non-tacky: 5-18 hrs Depending on the room temperature (Data based on 100ml mixing)

    • Time to reach full cure: 72 hrs (Data based on 100ml mixing)

    • Viscosity: 760 cps for Part A (Brookfield 20 rpm), 21000 cps for Part B (Brookfield 20 rpm). The viscosity of the A+B mixture is around 5000cps. Its not suitable for deep casting as it might trap some bubble in a deep block.

    • Clarity: Pt-Co value < 10 for both Part A and Part B

    • Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM. 

  • Features

    • No VOC; Zero Solvent; BPA Free; Eco Friendly; Meet and Exceed Australian Standard AS 2311-2017 and ASTM D3960-05

    • Crystal Clear Finish: Cures Crystal Clear. One of the clearest epoxies you can find. Suitable for wooden bar tops, embedding pictures, bottle cap table projects & more

    • UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light

    • Self Level Mixture: Will self level over surfaces including corners, bar rails and edges leaving consistent thickness

    • Impact Resistant: Cures super strong, leaving a smooth impact resistant surface

    • Minimal odour and NO yellowing.

    • Easy To Use: 1 to 1 by volume mix ratio

Related Products

bottom of page