top of page
Eparency Fast Curing Resin

Eparency Fast Curing Resin

PriceFrom $47.60
suitable for making small pieces and shallow pours such as pendants, coasters, trays, small timber cracks and voids. Usually cures within 24 hours. Do not pour over 20mm or 1kg depending on volume and conditions to avoid overheating (use all purpose or superdeep resin for deep pour projects). Not suitable for coating.
 
100% Australian owned and Australian manufactured

  • Directions

    Mix resin and hardener in exactly 2:1 ratio by volume ( 2 parts A and 1 part B) Use a plastic or silicone container for mixing and mix thoroughly, scrape sides and bottom of container to fully integrate products. Please use a mixing container that is clean and free of contamination. Tiny contamination would deteriorate the quality of final result. Do not use metal, especially aluminium containers to mix or mixtures will turn milky colour. Once the product is poured into the mould, let the resin settle allowing air bubbles or foam to float to the surface, most bubbles will float to the surface and burst themselves. Any remaining bubbles or foam can be removed with a heat gun or Blow torch.

  • Specifications

    • Mixing quantity (the more you mix, the fast it cures and vice versa)

    • Room Temperature (higher room temperature will speed up the curing)

    • Mixing ratio: 2:1 (2 Parts A and 1 Part B)

    • Application temperature: Wide temperature range through summer to winter

    • Pot life(working time): 1-2 hours (Data based on 100ml mixing; 20 degree C room temperature). Please pour this product into mould as soon as possible, to avoid bubbling.

    • Time to reach non-tacky: 5-18 hrs Depending on the room temperature (Data based on 100ml mixing)

    • Time to reach full cure: 24 hrs (Data based on 100ml mixing)

    • Viscosity: 600 cps for Part A (Brookfield 20 rpm), 150 cps for Part B (Brookfield 20 rpm)

    • Clarity: Pt-Co value < 10 for both Part A and Part B

    • Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM. 

  • Features

    • No VOC; Zero Solvent; BPA Free; Eco Friendly; Meet and Exceed Australian Standard AS 2311-2017 and ASTM D3960-05

    • Crystal Clear Finish: Cures Crystal Clear. One of the clearest epoxies you can find. Suitable for wooden bar tops, embedding pictures, bottle cap table projects & more

    • UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light

    • Self Level Mixture: Will self level over surfaces including corners, bar rails and edges leaving consistent thickness

    • Superior Air Release: Some epoxies may bubble, fish eye or crater. Our formula features superior air release, minimizing these concerns

    • Impact Resistant: Cures super strong, leaving a smooth impact resistant surface

    • Minimal odour and NO yellowing after long periods of time.

    • Easy To Use: 2 to 1 by volume mix ratio

Related Products

bottom of page